[OPGELET] Flysurfer safety notice!

Evan
Administrator

Berichten: 9651
Logs: 0 | 1481 uur
Juli 26, 2013, 13:11:57
edit2Rapporteer  
Belangrijk bericht voor iedereen die de Flysurfer Infinity 2.0 Bar vaart:


FLYSURFER SAFETY NOTICE
26.Jul.2013:

Date: 26th of July 2013

Concerns:
Affected kites are of the type FLYSURFER SPEED3 12m, 15m, 19m, 21m, FLYSURFER SPEED4, 8m, 10m, FLYSURFER UNITY 6m, 8m, 10m, 12m, FLYSURFER OUTLAW 6m, 8m, 10m, 12m, 14m, FLYSURFER PSYCHO4 6m, 8m, 10m, 12m, 15m, FLYSURFER CRONIX 6m, 8m, 10m, 12m. Which are delivered to FLYSURFER sales partners after 01.01.2013. NOT AFFECTED are kites delivered BEFORE 01.01.2013 and all kites of the VIRON series.

During routine checks concerning serial controlling of kites, we determined that a few individual Quick Releases of the Infinity 2.0 Bar system had breaking strenghts of below 200kg. More detailed studies have shown that in production mistakenly a false line has been used, which was not according to our specifications and is unsuitable to be used for the purpose as a loopline.

So far, not a single case is known to us, that Quick Releases were broken on kites that were delivered to FLYSURFER customers.
Should a Quick Release break during the use of the kite, the kite falls into SAFETY mode.
This can, especially when jumping over land (snow kiting, land kite boarding) or kiting on open waters under certain conditions, have fatal consequences for the user!

FLYSURFER is working hard and under full pressure to find a quick and satisfactory solution for the affected customers.

Until then FLYSURFER URGENTLY ADVISES TO NOT USE KITES WHICH ARE AFFECTED BY THIS ISSUE.

FLYSURFER will immediately inform customers and sales partners when a solution is ready.
markus

Berichten: 1907
Logs: 0 | 855 uur
Antwoord #1 Juli 26, 2013, 13:16:16
edit2Rapporteer  
 ThumpsUp.   Las het net idd!  aardige klus voor ze!!
DevilOfExcitement

Geen avatar

Berichten: 18
Antwoord #2 Juli 26, 2013, 14:42:51
edit2Rapporteer  
Netjes dat er, ondanks dat er (nog) geen ongelukken zijn gebeurd wel communicatie over is. Ze kunnen het ook in de doofpot proberen te stoppen. Wel apart dat het issue nu opeens naar voren komt en dat ze dit niet eerder hebben gevonden.
Eagle-Jan

Berichten: 4582
Logs: 0 | 2 uur
Antwoord #3 Juli 26, 2013, 22:39:46
edit2Rapporteer  
Goede zaak.
Jeromez

Berichten: 3323
Logs: 0 | 427 uur
Antwoord #4 Juli 26, 2013, 23:01:06
edit2Rapporteer  
Woeps
TIASOF

Berichten: 362
Logs: 0 | 105 uur
Antwoord #5 Augustus 12, 2013, 12:47:20
edit2Rapporteer  
Volgende bericht staat op de website van flysurfer!  ThumpsUp

http://www.flysurfer.com/news/10681-safety-notice-for-infinity-2-o-quickrelease/

SAFETY NOTICE – QR2.0 exchange procedure
SAFETY NOTICE – QR2.0 exchange procedure
09.Aug.2013:
Exchange procedure for the QR2.0

Concerns: Affected kites are of the type FLYSURFER SPEED3 12m, 15m, 19m, 21m, FLYSURFER SPEED4, 8m, 10m, FLYSURFER UNITY 6m, 8m, 10m, 12m, FLYSURFER OUTLAW 6m, 8m, 10m, 12m, 14m, FLYSURFER PSYCHO4 6m, 8m, 10m, 12m, 15m, FLYSURFER CRONIX 6m, 8m, 10m, 12m. Which are delivered to FLYSURFER sales partners after 01.01.2013.

NOT AFFECTED are kites delivered BEFORE 01.01.2013 and all kites of the VIRON series.

During routine checks concerning serial controlling of kites, we determined that a few individual Quick Releases of the Infinity 2.0 Bar system had breaking strengths of below 200kg. More detailed studies have shown that in production mistakenly a false line has been used, which was not according to our specifications and is unsuitable to be used for the purpose as a loopline.

So far, not a single case is known to us, that Quick Releases were broken on kites that were delivered to FLYSURFER customers. Should a Quick Release break during the use of the kite, the kite falls into SAFETY mode. This can, especially when jumping over land (snow kiting, land kite boarding) or kiting on open waters under certain conditions, have fatal consequences for the user!

Further checks & detailed studies have determined, that very sporadically also a certain metal part in the QR can have a weak point. FLYSURFER therefor advises URGENTLY to exchange the complete QR2.0 on affected kites, exchanging only the loopline is not enough!

Marquartstein, 9th of August 2013
Thomas Allertseder
CEO Finance & Administration Skywalk GmbH & Co. KG

Below you will find more information in regards to the QR2.0 exchange procedure.

QUESTION nr.1: Is my kite affected?

1.1. Up front
Every Flysurfer kite (excluding VIRON), which is produced in 2013, stocked at Flysurfer in 2013, AND delivered to end-customers or sales partners by Flysurfer, CAN potentially be AFFECTED by this safety notice. All kites which have been delivered to customers or sales partners before 2013 are NOT affected.

1.2. Specifying the serial number of your kite:
The serial number of a Flysurfer kite can be found:

on the ID-card, which is in the transparent top pocket of the kitebag
on the inside of the kite’s tip, or inside the middle air-intake
on the invoice
The serial number is built up subsequently in parts, for example: FKSD4100D-4412-30785

F=Flysurfer  K=Kite  SD4=Speed4  100D=10.0 deluxe
4412=KW44  Year 2012 –> this is the order week at our production (This is not the production week!)
30785= the consecutive 5 digit serial number
1.3. Serial number check on the FLYSURFER Homepage

When you have specified the serial number(s) of your kite(s) go to: http://www.flysurfer.com/serial/
Please enter the 5-digit consecutive serial number of your kite(s)!
–> Like for example the kite mentioned in point 1.2: 30785
The form will give you an immediate answer if your kite is affected by this Safety Notice & Quick Release exchange procedure
–> Is your kite not affected, you can go ahead and go kiting
–> Is your kite affected, please continue to question nr.2

Question nr.2: Yes, my kite is affected! – Which options do I have for a QR2.0 exchange?

Option A: Do the exchange yourself

A.1. Please send an e-mail to info@flysurfer.com with:

The complete serial number of the affected kite(s)
Your complete contact details (name, address, e-mail, telephone number)
When possible attached a copy (scan/photo) of your purchase invoice
A.2. Flysurfer will sent you, free of charge, a checked & 100% working QR2.0.
An easy how-to-guide has been made for the QR2.0 exchange. Please follow all directions step by step.  A complete exchange only takes some minutes.

A.3. We ask you kindly to return your old (exchanged) QR2.0 to us

Please include your serial number, contact data & name for reference, or just print the e-mail, which is used at point A.1.
Please do this return on collect on delivery basis (shipment costs will be payed by Flysurfer)
Option B: Exchange through Flysurfer Sales-Partners (Dealers/Schools/Importers)

B.1. First contact your local Flysurfer dealer/importer of trust/choice.

B.2. Provide the serial number of your affected kite(s) to your local FS sales-partner.

Shipping & Exchange of the QR2.0 will be arranged by Flysurfer with the FS sales-partner.
QR2.0 Exchange & Return will be arranged together with the FS sales-partner.
Return of the old (exchanged) QR2.0 will be organised by Flysurfer with the FS sales-partner.
Option C: Exchange to be done by Flysurfer

C.1. When you do not trust yourself to exchange the QR2.0 yourself (with the how-to-guide) or do not want to do it yourself, then please contact Flysurfer with all contact details mentioned at point A.1. In addition, please mention that you want the exchange to be done by the Flysurfer workshop.

C.2. You will be contacted by our customer service and everything will be organized for you.

C.3. The disadvantage of this option, (compared to option A), is that it will certainly take several weeks before you can use your kite again! Shipping and especially the QR2.0 exchange in our workshop currently take some time.

Finally we want to inform you that the first batch of Exchange-QR2.0 has arrived in our Office today. That means the exchange procedure for the QR2.0 will start officially at Monday the 12th of August. It could be that there will be some short delays because of illness (customer service & logistics) and because of a limited first amount of Exchange-QR2.0, we are really sorry for that.

Please bear with us and we appreciate your patience, a new batch of Exchange-QR2.0 will arrive next week.

If you have any further questions, we are glad to help you:

By e-mail: info@flysurfer.com
By telephone: +49 8641 6948 30

Our (new) shipping address:
Flysurfer Kiteboarding
Brand of Skywalk GmbH & Co. KG
Windeckstr. 4
83250 MARQUARTSTEIN
GERMANY

With best regards
The complete Flysurfer Team
Ramon Schoenmaker
International Sales & Marketing Manager Flysurfer Kiteboarding
« vorige volgende »
Ga naar:  


© 2002 - 2024 Kitehigh

Sorry, the copyright must be in the template.
Please notify this forum's administrator that this site is missing the copyright message for SMF so they can rectify the situation. Display of copyright is a legal requirement. For more information on this please visit the Simple Machines website.