The advised selling prices are, for a kite complete.
7m complete : 799 euros
9m complete : 849 euros
12m complete : 899 euros
15m complete : 949 euros
18m complete : 999 euros
These prices can vary a little bit forevery country because of shipment cost, taxes and so on.
About the Griffin Design
Griffin - A mythical beast, the body of a lion and the wings and head
of an eagle - Just as this hybrid beast possesses the most beneficial
features of the king of the air and king of the land .... The Griffin
Kite possesses a design which gives the responsiveness, jumps and
performance of the c style kites with the security of the currently
popular 'flat' style kites.
• Shape changing, breathable kite allows the airfoil to change foil
section increasing the range of the kite.
• Flow attachment is increased preventing airfoil from stalling
• Reactive Foil Section
The most efficient flying machines, eg albatross and other bird which
spend extended time in flight all have the characteristic of being
able to change their aerofoil to maximise their performance in
relation to the prevailing conditions.
They do this by changing the angle of attack of their foils (wings).
Having a centre strut inhibits the ability to do this.
Evolving kite structure by removing the centre strut the Monkey kite
design can ‘breathe’ and flex just as a bird wing does to give the
greatest efficiency available. This gives the kite aeroelasticity.
Allows the design to have more ribs at the tips – where they deliver
greater airflow providing increased performance at the bottom and top
end of the kite range. This delays stalling behaviour at the bottom
end increasing your kites wind range.
Not having a centre strut removes excess weight from the kite which
increases performance due to less drag
When the kite is dropped in the water it rolls onto its back and is
much more stable and easier to relauch.
• Valves – non return function on struts allow you to pump up the
struts hard without having to pinch the valves. A deflation tool is
attached to each valve to make a quick getaway easy.
• Pump leash attachment point at centre of LE
• Monkey DNA Unique serial number for QC and theft prevention
• Shock Proof Construction – Design of canopy construction takes
into account that all fabrics fatigue and stretch over time. By
having a curve in the canopy layout, a large percentage of the
cyclical stress the kite is placed under when loaded for flying and
the intense stress of crashes are dissipated through a integral shock
absorber running laterally through the canopy design.
No flies on the Monkey – Hydrophobic and sand shedding materials
Specially made polyester ripstop for the canopy 52g/m2
Super Durable Dacron 160g/m2
Bumpers –
Why we don’t have thick bumpers like some other kites. Bumpers are
an unnecessary placebo feature that adds weight, drag and cyclical
fabric tension to the canopy. Bumpers are what we like to call ‘kite
fluff’ have a look at your kite when it is on the beach. You will
not see on any kite the ‘bumper’ coming in contact with sand etc.
They perform no useful purpose. We have deliberately evolved them out
of our design.
Trailing edge of the kite
Leach lag free - Some kites have a line sewn into the seam at the
trailing edge. All fabrics stretch under load and at different rates.
Leach lines do not stretch at the same rate as canopy fabrics and
cause ‘ballooning of the canopy over time and wear on the trailing
edge as a result. We have evolved the leach line out of our
construction as it serves no function purpose.
Reinforced trailing edge – Some kites do not have a leach line for
the same reason as us but they choose to reinforce the trailing edge
with another material. This causes the same issues
Twin Fold Toughening (TFT)
We use a double fold of self fabric of the canopy with a zig zag
stitch to give the same beneficial effect of reinforcement without
the associated issues of stretch differential creating tension, drag
or adding weight.
Wing Tips
• Dacron – Super Tough Tips – reinforced double layer wing tips
to withstand wear from self launching
Dual attachment points (DAP)
Gives you options to control the performance and feel of your kite
At leading edge we have power and depower setting where the angle of
attack of the kite can be adjusted. To depower use the foremost point
and to power up use the point closes to the centre of the kite.
Back we have faster and slower turning
Fast at trailing edge and slower turning at the centre
OSB – Our oversized TPU bladders are made from a chemically superior
polymer. They are oversized which means they do not ‘pop’ and
cause blow outs because the bladders never expand to a point when
they are under stress
Rapporteer
, het is het laatste prototype, de vliegeigenschappen en andere dingen blijven dus het zelfde , alleen het design kan dus nog veranderen 
